Select Page

The battery can be charged when it is inside your ebike via the charging port, or outside your ebike by removing it.

Charging the battery whilst it’s inside your ebike:

  1. Locate the charging port (you’ll find it on the opposite side to drive side)
  2. Remove the charging port cover
  3. Plug the charger into the charging port, aligning the grooves on the charger with the grooves on the charging port
  4. Turn your FLIT-16 on using the power button on the handlebar display to check that your ebike is charging
  5. Once the handlebar display shows that your ebike is fully charged, unplug the charger and replace the charging port cover

Charging the battery outside your ebike:

    1. First, remove the battery: undo the seat post clamp, slide the seat post out of your ebike, then grab the black plastic rear light holder and pull to slide the battery out. You can find full instructions here:
    2. Plug the charger into the charging port, aligning the grooves on the charger with the grooves on the charging port
    3. Check that your battery is charging: you should see a blinking light
    4. Once the battery is charged, you’ll see that all four LED lights are lit up
    5. Unplug the charger and re-insert the battery into your ebike. Full instructions on how to re-insert the battery can be found here:

Pin It on Pinterest