Select Page

Helpie FAQ

General FAQs

  • How to unfold your FLIT-16

    1. Take position by the charging port of the bike 
    2. Open the seat post quick release and twist the saddle to your desired height.
    3. Take the saddle in your right hand, and grasp the tube on the front wheel with your left
    4. Lift both simultaneously to swing the rear wheel out from under the bike. Keep the front wheel in its position 
    5. Raise the handlebars and spin the top hinge
    6. Squeeze and hold the right brake, then lift the handlebars. Keeping them in the same position. 
    7. Spin the lower hinge.
    8. Unfold both pedals.   
    9. Remember it like a dance. The Flit-step. 
    10. The simultaneous swing of the rear wheel
    11. The raising of the handlebars 
    12. And the final lifting of the handlebar
    13. Swing Raise Lift.

  • How to fold your FLIT-16

    1. Take your position by the charging port of the bike. 
    2. Fold both pedals
    3. Spin the nearest pedal to floor 
    4. Pull the saddle to your hip 
    5. Twist the handlebars away 
    6. Spin the lower hinge 
    7. Taking the bike by the saddle, lift the handlebars and slide to the left 
    8. With your right hand on the handlebars, spin the top hinge and lower them down. 
    9. Flit-STEP on the rear lever, and lift the saddle
    10. Taking the saddle in your right hand, grasp the tube on the front wheel with your left, then lift both simultaneously to swing the rear wheel under the bike. 
    11. And to complete the routine release the saddle clip and lower the saddle. 
    12. Spin Spin, lift and slide. Fold. Flit-step. And Swing. 

  • Pin It on Pinterest